g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available

g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available

g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available

g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available

g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available

g.USBamp Research

g.USBamp RESEARCH is a high-performance and high-accuracy biosignal amplifier for the acquisition and processing of physiological signals. Therefore, you can record physiological activity from the brain, eyes, heart, muscles, and more – including respiration, galvanic skin response, temperature, and many other physiological and physical parameters. Due to its sophisticated technical specifications and the large software environment, this g.USBamp RESEARCH has become a widely used standard for neuropsychological research, neurophysiologcal research, life sciences and biofeedback, neurofeedback and brain-computer interface (BCI) research.

g.USBamp RESEARCH is USB enabled and supports 16 simultaneously sampled biosignal channels at 24 bit resolution. A total of 4 independent grounds guarantee that there is no interference between the recorded signals. The biosignal amplifier connects easily to the USB socket on your PC/notebook and can immediately be used for data recording. You can also build a multi-channel system with more than 16 channels using multiple g.USBamp devices. Therefore, a synchronization cable guarantees that all devices are sampling at exactly the same frequency. The g.USBamp has an input range of ± 340 mV, which allows recording of DC signals without saturation. Digital inputs and outputs allow the measurement of trigger channels together with the biosignal channels to easily pass analysis results to the outside world. A short-cut input allows users to connect g.USBamp RESEARCH inputs quickly to the ground potential to protect the amplifier against overflows, which may occur in operating rooms with gamma knives or other environments.

g.USBamp RESEARCH is intended to be used for physiological research and experiments only. In other words, this biosignal amplifier is not a medical device to be used for diagnosis, treatment of disease or other medical applications. All features of g.USBamp RESEARCH are freely accessible and configurable.

                     Product Highlights

• 80-256 DC coupled wide-range input channels, record any type of signal (EEG, ECoG, EMG, EOG/spikes, connected various sensors)
• 256 channels perfectly synchronized with 24 Bit
• Supports active and passive EEG electrodes and ECoG grids
• Fully integrated into g.tec software components for real-time analysis
• Integrated impedance measurement for active and passive electrodes
• Simultaneous tDCS & TMS possible
• Easy configuration and setup via high-speed online data processing for SIMULINK
• Driver package/API available